Shanghai Industrial And Commercial Bureau Announces The Sampling Quality Of Garment In Circulation And Fast Fashion.

Recently, the Shanghai Bureau of industry and Commerce has concentrated on the inspection and inspection of 226 batches of clothing sold by shopping malls such as Jiu Guang, Yongan, Parkson, sun moon and Meilong town.

After testing, 65 batches were unqualified and the failure rate was 28.8%.

The main unqualified items were formaldehyde, pH value, color fastness and slippage.

First, formaldehyde exceeded the standard, with 1 batches.

Spot checks found that the new Shenzhen Yichang Trade Co., Ltd. Shanghai second branches sold by the rising speed clothing (Huizhou) Limited company produced "QUIKSILVER" brand men's knitted coat (model specification: 175/92A, 180/96A; model specification: 41-1388), formaldehyde content measured at 318 / / (standard value should be less than 75 75 / /).

This index exceeds the standard and directly endangers human health.

Two, the pH value exceeds the standard, and there are 2 batches.

Spot checks found that the individual batches of pH values were measured at 8.8, exceeding the permitted range of national standards.

The surface of human skin is weakly acidic. Therefore, the pH value of textiles directly contacting the skin should be between weak acid and neutral, so that the weak acidic environment of the skin surface will not be destroyed.

The index is over standard, which is likely to cause skin allergy and induce infection.

Three is the color fastness is not qualified, there are 23 batches.

It was found that the color fastness to wet rubbing of individual batches was only 1-2, or the color fastness to perspiration was 2 (the standard value should be equal to 3 or more).

Color fastness is the safety index of textiles.

The index is not qualified, on the one hand, direct impact.

Quality and normal use, on the other hand, it is easy to fade, stain and fade when washing.

Four is

Nonstandard, there are 40 batches.

Fiber content has always been one of the most concerned issues for consumers.

Spot checks found that some batches of fiber content measured value is obviously inconsistent with the nominal value, or did not according to the requirements of the national fiber label, measured as polyester fiber, marked as gold and silver wire.

Five is

There are 1 batches.

Spot checks found that the batches of cracks in the batches were measured at 1.2cm, (the standard value should be less than 0.6cm).

Slippage is the main complaint item of fast fashion clothing, which is characterized by the split of sleeves, side seams and back joints. Apart from the problem of sewing, there is a tendency for consumers to choose to be more intimate when buying.

According to the results of this sampling inspection, the industry and commerce departments have ordered relevant operators to immediately stop selling unqualified goods, and urge them to strengthen internal quality management measures, establish and improve systems such as cable ticket, stock inspection, sales account and after-sale service.

Meanwhile, the business sector reminds consumers that they should pay attention to the following points when choosing clothes.

First, look at the commodity logo, and the factory name, factory address and trademark of the Chinese language should be included. If it is an imported commodity, it should have the name and address of the country of origin and the domestic agent or distributor.

Two, check whether there are obvious defects on the surface of the garment, whether the main joints are chromatic aberration, and then check the texture of various accessories and ingredients, such as whether the slide fastener is slippery, whether the buttons are firm, whether the metal decorations are corroded, etc., and finally, to see whether there are any phenomena such as adhesive, liners, bag heads, flap, whether there are degumming, foaming or seeping, and so on.