Home >

Change Structure Design Of Trousers

2010/2/9 19:19:00 233

Change Structure Design Of Trousers

If the style of trousers changes, its structure will also change on the original basis. Then it is necessary to re calculate the sizes of trousers according to the needs of styles, so as to ensure that the trousers are still fit after changing.



1, body pants structure design

The difference between the body pants and the basic trousers is that the addition of the buttocks is reduced and the length of the straight crotch is reduced.

Generally, the front trousers are free of pleat, and there is a province in the rear trousers, such as the type of trousers, or the horizontal section, such as sticking jeans.

(1) specification design

TL=0.6G+X

W=W*+ (3~4)

H=H*+ (4~6)

BR=TL/10+H/10+ (6~7)

SB=0.2H-2

FH=H/4, BH=FH; FW=W/4, BW=W/4+ provincial road; FSB=SB-1, BSB=SB+1.

(2) structural drawing methods and procedures


 

It is basically the same as the basic pants. First draw the front pants, then draw the trousers, as shown in figure 1-2-23.

Due to the higher fitting degree of body pants, it is necessary to modify the relevant parts of the base Pants: the length of straight crotch is reduced; the front center line is 1~1.5cm and 0.7cm; the front side seam is lifted 0.4cm, and the rear midline gradient is increased.

2., loose pants structure design

The difference between loose trousers and basic trousers is mainly increased in the increase of hip girth, and the length of straight crotch is increased.

The front trousers are folded and pleat, and the back trousers are saved.

(1) specification design

TL=0.6G+X

W=W*+ (3~4)

H=H*+20 (greater than 20)

BR=TL/10+H/10+10

SB=0.2H

(2) structural drawing methods and procedures

It is the same as the basic pants drawing method, as shown in figure 1-2-24.

The structural changes of trousers include the change of the shape of trouser legs besides the degree of fit, such as straight trousers, tapered trousers, bell bottoms, breeches and pedals. The waistline changes are like low waist trousers and high waist trousers; the change of the length of trouser legs is like shorts, knee pants, seven points trousers, nine pants, etc.

  • Related reading

Structure Design And Factor Analysis Of Trousers

Learning Area
|
2010/2/9 19:15:00
94

Basic Knowledge Of Factory Made Garment And Plate Making

Learning Area
|
2010/2/9 21:12:00
54

The Relationship Between Sitting Height And Standing Depth Of Human Body

Learning Area
|
2010/2/9 19:02:00
260

Special Body Pants Version Processing Skills

Learning Area
|
2010/2/9 19:00:00
741

Plate Making Method Of Skew Cut Dress

Learning Area
|
2010/2/9 18:55:00
180
Read the next article

How To Make The Garment Plate Meet The Special Body Shape?