New Threshold For Printing And Dyeing Will Be Greatly Increased During The Year.

< p > the Ministry of industry and commerce is considering the latest admittance conditions of < a href= "//www.sjfzxm.com/news/" > printing and dyeing industry < /a >, and is expected to be introduced in the coming year.

Insiders expect that the entry threshold will be greatly improved.

< /p >

< p > 24, from the relevant channels, the Ministry of industry and commerce is considering the latest admittance conditions of printing and dyeing industry, and is expected to be introduced in the year.

Insiders expect that the entry threshold will be greatly improved.

< /p >

< p > it is understood that < a target= "_blank" href= "//www.sjfzxm.com/" > textile < /a > printing and dyeing industry contributes about 3% of the profits of all industries every year, while sewage discharge accounts for 10% of the total industrial sewage discharge, and it has an increasing trend year by year.

At the same time, the recovery rate of wastewater is only 7%, the lowest among all industries.

< /p >

< p > in fact, the development of printing and dyeing industry is facing many difficulties.

The macroeconomic downturn, the difficulty of financing and the rising cost of labor and resources make the printing and dyeing industry facing increasingly severe pressure.

< /p >

< p > the cost of water and electricity accounts for about 40% of the total cost, and the shortage of water resources and soaring energy costs make the cost of < a href= "//www.sjfzxm.com/news/index_c.asp" > printing and dyeing enterprise < /a > increasing.

At the same time, because of the characteristics of the consumption of resources in the printing and dyeing industry, the cost caused by environmental investment is also increasing year by year.

< /p >

< p > by the tightening of capital environment and the increase of capital expenditure of finished products, the cost of financial management of enterprises has soared.

Taking management cost as an example, the cost of printing and dyeing management increased by more than 40% in the printing and dyeing subdivision industry. The gross price of printing and dyeing management was less than a, and the cost of printing and dyeing management was less than 20%, and the increase of cotton printing and dyeing reached 10%. The cost of printing and dyeing management increased by more than href=. The cost of printing and dyeing management increased by more than 40%.

< /p >

< p > although the industry access threshold is rising, the technical level of printing and dyeing industry is still in urgent need of improvement, especially in the high-end products market, the export price of similar products is far lower than the import price.

< /p >

"P >" increased pressure on environmental protection, constrained by capital and technology, and serious pollution of small printing and dyeing enterprises is difficult to continue.

The elimination of backward production capacity will open up market space for the dominant enterprises.

GF Securities analysts believe that the elimination of backward production capacity, driven by environmental protection and energy saving technology of large-scale printing and dyeing enterprises are expected to achieve rapid growth.

< /p >

In the meantime, in recent years, the development and Reform Commission has introduced a plan to eliminate backward production capacity in the printing and dyeing industry. P

With the continuous upgrading of industry demand and the gradual elimination of backward production capacity, the average annual production capacity will reach 60-65 billion meters, with an average annual investment of more than 12 billion yuan.

The industry expects that the increasing industry access threshold will become a catalyst for industry differentiation.

< /p >

< p > < strong > < /strong > < a > href= > //www.sjfzxm.com > > strong > printing and dyeing industry entry conditions < /strong > /a > strong > (Revised Edition 2010) < /strong > < > > > > > /strong > /a > < strong >

In order to speed up the structural adjustment of the printing and dyeing industry and promote the energy conservation and emission reduction and sustainable development of the industry, according to the relevant laws, regulations and industrial policies of the state, the current conditions for printing and dyeing industry promulgated in 2008 are revised. < p >

< /p >

< p > 1. Layout of production enterprises < /p >

(P) (1) the departments concerned of all provinces, autonomous regions and municipalities directly under the central government should scientifically plan the development of the printing and dyeing industry according to their resources, energy status and market demand.

The construction and renovation of new printing and dyeing projects must conform to the state's industrial planning and industrial policies, and meet the requirements of the regional ecological environment planning and general land use planning.

< /p >

< p > (two) no new printing and dyeing projects shall be allowed within the limits specified by the State Council, the relevant state departments and the people's governments at the provinces (autonomous regions and municipalities directly under the central government), and the boundaries between the two sides of the main river banks, and the printing and dyeing enterprises that have been put into operation in the above regions shall, within the prescribed time limit, withdraw from the area according to the requirements of regional planning and the protection of the ecological environment.

< /p >

< p > (three) no new printing and dyeing projects shall be established in principle in areas with poor water quality or poor water quality.

New printing and dyeing projects in areas with relatively sufficient water supply should be scientifically planned and rationally arranged by relevant departments of local governments. Centralized construction must be carried out in industrial parks, centralized heating and centralized disposal of pollutants should be carried out.

In the absence of environmental capacity, it is necessary to restrict the development of printing and dyeing projects, and new or extension projects should be combined with backward production capacity in the eliminated areas.

Enterprises outside the industrial park should gradually move to the park, and the expansion and expansion projects should not increase the discharge of pollutants.

< /p >

< p > two, process and equipment requirements < /p >

(P) (1) the advanced or new technology should be adopted in the construction and reconstruction of the printing and dyeing project. The equipment with low pollution intensity, energy saving and environmental protection should be adopted, and the main equipment parameters should be on-line tested and automatically controlled.

It is forbidden to choose the backward production technology and equipment that are included in the guidance catalogue of industrial structure adjustment, restricted categories and eliminated classes, and restrict the use of second-hand pre-treatment and dyeing equipment which has been used for more than 5 years and fails to meet the requirements of energy conservation and environmental protection.

The overall level of new or expanded printing and dyeing production lines should be close to or up to the international advanced level. The design and construction of printing and dyeing projects for cotton, chemical fiber and blended fabrics shall be carried out in accordance with the code for design of printing and dyeing factories (GB50426-2007)].

< /p >

< p > (two) newly built or rebuilt and dyeing and printing projects should give priority to high efficiency, energy saving and low consumption continuous processing equipment and processes; the continuous washing device requires good sealing performance, and equipped with countercurrent, efficient rinsing and heat recovery devices; intermittent dyeing equipment should be able to meet the technological requirements of less than 1:8; the drawing and setting equipment must have on-line measurement and control device for main process parameters such as temperature and humidity, with exhaust gas purification and waste heat recovery device, and the temperature difference between the outer surface and the ambient temperature of the heat insulation plate of the box body is not more than 15 degrees Celsius.

< /p >

< p > (three) the existing printing and dyeing enterprises should intensify technological pformation and gradually eliminate the pre-processing equipment, hot air drawing and setting equipment with more than 15 years of service life, and intermittent dyeing equipment with bath ratio larger than 1:10, and eliminate backward processes with long process, high energy consumption and large pollution.

We support the adoption of advanced technology to pform and upgrade the technological level of existing equipment. Enterprises with backward production technology and equipment must be combined with elimination and backward production to allow expansion and expansion.

< /p >

< p > three, quality and management < /p >

< p > (1) < a href= "//www.sjfzxm.com" > printing and dyeing enterprise < /a > we should develop and produce products with low consumption, low pollution and meet market demand, and encourage the adoption of new technology, new technology, new equipment and new materials to develop textile products with independent intellectual property rights and high added value.

The quality of products should meet the requirements of national or industrial standards, and the rate of qualified products can reach more than 95%.

< /p >

< p > (two) printing and dyeing enterprises should carry out three levels of energy consumption and water metering management, set up specialized agencies or personnel to supervise the energy, water intake and sewage discharge, and establish a management assessment system and data statistics system.

< /p >

< p > (three) printing and dyeing enterprises should strengthen management and improve enterprise management system.

Enterprises should be encouraged to carry out certification of management systems such as quality, environment and occupational health, and support enterprises to adopt information management tools to improve the efficiency and level of enterprise management.

< /p >

< p > four, resource consumption < /p >

< p > (1) the unit energy consumption and fresh water intake of new or expanded printing and dyeing projects should meet the specified requirements (see Table 1).

< /p >

< p > (two) the existing printing and dyeing enterprises should speed up the technological pformation, and the unit product energy consumption and fresh water intake must meet the specified requirements (see Table 2).

< /p >

< p > five, environmental protection and comprehensive utilization of resources < /p >

< p > (1) the environmental protection facilities for new or reconstruction and dyeing and printing projects shall be designed and constructed according to the requirements of the environmental protection design standard for textile enterprises (GB50425-2007), and the "Three Simultaneity" system for the simultaneous design, construction and commissioning of environmental protection facilities and main works shall be carried out.

The printing and dyeing wastewater should be handled or accessed by the centralized industrial waste water treatment facilities in principle, and it can not be connected to the urban sewage treatment system, and it is necessary to access the municipal sewage treatment system. It must be reported to the competent department of the town sewage treatment industry for full demonstration and only after the urban drainage permit is issued can it be accessed.

The printing and dyeing enterprises that are connected to the urban sewage treatment system shall meet the requirements specified in the centralized wastewater treatment plant or the water quality standard for the discharge of sewage into urban sewers.

The effluent discharged directly into the water body must meet the control requirements of the national and local textile dyeing and finishing industry's water pollutants discharge standards.

The sludge treatment process with high efficiency and energy saving should be adopted to realize sludge reclamation and harmless treatment.

< /p >

< p > (two) the existing printing and dyeing enterprises should have the conditions of treating waste water and solid waste, strengthen the analysis and monitoring of the quality of the waste water and the running water, conduct comprehensive treatment of the waste water and solid wastes, and conduct on-line monitoring of the discharge of the waste water.

If the wastewater treatment facilities can not run normally and the wastewater discharge fails to meet the standards, the relevant departments can not meet the standards within a time limit for rectification, and shall not continue to engage in production activities.

< /p >

< p > (three) printing and dyeing enterprises should choose the fabric of biodegradable (or easy to recycle) slurry according to the principle of environmentally-friendly and comprehensive utilization of resources; use eco-friendly, high dye uptake dyes and high performance auxiliaries; improve the cooling water, condensate and waste heat recovery devices; mercerizing process must be equipped with automatic control and alkali recovery equipment; production drainage, turbidity and turbidity, quality treatment, quality reuse, water reuse rate should reach more than 35%.

< /p >

< p > (four) printing and dyeing enterprises should adopt the cleaner production technology of sustainable development, improve the efficiency of resource utilization, and control the amount of pollutants from the source of production.

The printing and dyeing enterprises shall regularly implement cleaner production audit according to law, carry out energy audit according to relevant regulations, and continuously improve the level of cleaner production of enterprises.

< /p >

< p > six, safety production and social responsibility < /p >

< p > 1. The construction and renovation of the printing and dyeing project shall be carried out in accordance with the requirements of the safety design standards for textile enterprises, and the safety production facilities shall be built according to the relevant state regulations and requirements, and the safety pre assessment and the completion and acceptance of the safety facilities shall be carried out, so as to ensure that the safety facilities are simultaneously designed, constructed and put into production and use at the same time.

< /p >

< p > (two) encourage printing and dyeing enterprises to protect the rights and interests of workers and consumers and fulfill their social responsibilities in accordance with the requirements of the CSC9000-T system.

< /p >

< p > seven, supervision and management < /p >

< p > (1) the construction and renovation of the printing and dyeing project must conform to the requirements.

The management of investment record, project construction, land supply, EIA approval, safety permission and credit financing should be based on this entry requirement.

New construction and extension projects should be put on record at provincial level investment or industrial management departments.

The project environmental impact assessment report shall be submitted to the provincial environmental protection department for examination and approval after putting forward the preliminary opinion of the provincial industrial administration department.

< /p >

< p > (two) investment, industry, land and resources, environmental protection, housing and urban and rural construction, safety supervision and other administrative departments should strengthen supervision and inspection of new and reconstruction projects and printing and dyeing projects in accordance with the law.

Production and operation can only be made after new or expanded printing and dyeing projects reach the entry conditions and go through the relevant licensing procedures.

For violation of the regulations, the relevant departments shall order them to rectify in time and deal with them severely according to law.

< /p >

< p > (three) the industrial management departments at all levels should strengthen the management of the printing and dyeing industry, urge the existing enterprises to speed up technological pformation in accordance with the requirements of entry conditions, speed up the elimination of backward production capacity, and standardize the management of enterprises.

According to the application of enterprises and verification by the provincial industrial administration departments, the state industrial administration departments regularly announce the printing and dyeing enterprises that meet the requirements of entry.

< /p >

< p > (four) about the "a href=" //www.sjfzxm.com "> Industry Association < /a >, we should publicize the national industrial policy, strengthen industry guidance and industry self-discipline, promote the technological progress of the printing and dyeing industry, and assist the relevant government departments in doing well the supervision and management of the industry.

< /p >

< p > eight, annex > /p >.

< p > (1) the entry conditions apply to all kinds of printing and dyeing enterprises in the territory of People's Republic of China (except for Hong Kong, Macao and Taiwan), with the ability of printing and dyeing cotton, wool, linen, silk, yarn dyed, < a href= "//www.sjfzxm.com" > knitting < /a > and so on.

< /p >

< p > (two) the standard or data adopted in this admission condition shall be amended as amended.

< /p >

< p > (three) the entry conditions have been implemented since June 1, 2010.

The conditions for printing and dyeing industry promulgated in February 4, 2008 will be abolished at the same time.

< /p >

< p > (four) the terms of entry are explained by the Ministry of industry and information technology.

< /p >